|
|
|
|
1/16 Tapered Carving Bit
This tool is a 4 flute carbide tool that offers exceptionally better finish than the stock tool.
Tool now ships without flats for improved balance, and no worries about clamping on a flat in the Rock Chuck System! A perfect combination!!!
$39.00
|
|
|
|
|
|
|
|
|
|
|
1/8 Cut out bit 3/4 inch flute
This tool replaces the Cutout bit that came with your machine. If you are using this in the QC style chuck you will need the 1/8 QC style bit adapter, as it has a 1/8 shank. If you are usuing the new "Rock" chuck, you will need a 1/8 sleeve. This tool has 3/4" length of flute. If you are cutting through stock that is 3/4 or thinner, this tool is significantly stronger than the stock tool. You can choke up on the tool, leaving it stick out less by more than 3/8"....
$25.00
|
|
|
|
|
|
|
|
|
|
|
1/8 Cut out bit 1 inch flute
This tool replaces the Cutout bit that came with your machine. If you are using this in the QC style chuck you will need the 1/8 QC style bit adapter, as it is a 1/8 shank tool. If you are usuing the new "Rock" chuck, you will need a 1/8 sleeve. This tool has 1" length of flute.
$25.00
|
|
|
|
|
|
|
|
|
|
|
3/16 Cut out bit 1 inch flute
This Cut out bit will require the use of a 3/16 Rock sleeve, as it has a 3/16 shank, and can only be used in the Rock Chuck system. This tool has 1" length of flute and cuts fantastic!
$32.00
|
|
|
|
|
|
|
|
|
|
|
Special cutting bits
I can get pretty much any tool you would desire. If you can describe it, i can probably get it. Please drop me an e-mail to request specials.
$0.00
|
|
|
|
|
|
|
